0 Items
£0.00 (inc. VAT)

STIHL MS 441 C-M W

(20") Petrol 70.7cc Chainsawcode: STMS441CMW
Now £924.96 (inc. VAT) (Delivery Terms*)
Was: £1,128.00 (inc. VAT) You Save: £203.04 (inc. VAT) (18%)
Item in Stock  |  Delivery within 3-5 working days
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout
STIHL

Modern, low vibration, high-performance saw with electric heated handles and STIHL M-Tronic (M) electric engine management. Up to 20% less fuel consumption and 50% fewer emissions compared to STIHL two-stroke engines of the same performance class without 2-MIX technology

Decompression valve

The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.

Heated handles (W)

These provide additional comfort in cold weather and can be engaged with a switch on the left handle as required.

STIHL M-Tronic (M)

This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

Advanced combustion technology

Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

HD2 filter

The HD2 filter is made from polyethylene filter material with up to 70% finer pores than fleece and polyamide filters to trap even very fine dust. In addition, it is oil and water-repellent and thus very easy to clean. The PET-covered filter cartridge with quick-release lock enables the filter to be assembled and disassembled in next to no time, without using tools.

Anti-vibration system

Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

Pre-separation air filtration system

STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

Compensator

This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

Variable-displacement oil pump

Allows a precise, demand-based delivery of oil. It's possible to reduce oil production by up to 50% in the E position. For very long cutting attachments or very dry wood, an additional volume of oil can be added by the user. similar to illustration.

Side chain tensioner

The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

Ematic chain lubrication system

The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.

STIHL ElastoStart

STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.

Carburettor heating (V)

By changing the chain saw from summer to winter operation, the intake air is pre-heated over the engine fins. This ensures that the carburettor does not ice up and you can continue working in freezing temperatures.

Tool free filler caps

Special catches on the fuel and oil tanks for easy opening and locking without the need for tools

BrandSTIHL
Scabbard SuppliedYes
Weight (Kg)6.7
Vibration Intensity left/right (m/s2)3.1/3.3
Sound Pressure Level (Db(A) / Lwa)105
Decompression ValveYes
Cutting Bar Length (cm/inches)50cm/20
Guide Bar TypeRollomatic E
Chain Brake SafetyYes
Chain TensioningManual
Chain Pitch3/8
Chain TypeRapid Super
Power Output (kW/hp)4.2 kW
Fuel Type2 Mix
Country Made InGermany
Engine/Motor Size (cc/W)70.7cc
Ignition / Start TypeRecoil
Type Of Engine2 Stroke
Part Number11382000132
ManufacturerSTIHL
Max Domestic Warranty (Yrs)2
Max Comm. Warranty (Yrs)1

For detailed information, please click here

*Please note that any sharp MOUNTFIELD and STIHL  products can not be shipped out as per the manufacturer's policy. They can either be collected from any of our stores or they may be hand delivered within a 20 mile radius, with applied delivery charges on top.

 (SHARP ITEMS ONLY)

 

* All our deliveries are either by UPS or Royal Mail '2nd class signed for'. Any abnormal charges will be shared with the customer, if applicable.

* Free delivery only for Order Value £150.00+


(Deliveries to Scottish Highlands will differ and may be quoted on case to case basis. For detailed terms and conditions please click here and to get a quotation for deliveries in these regions, call us on 020 8908 4744.)

 
- White Glove Service delivery rates

(For detailed terms and conditions please click here.) 

 

˗ White Glove Service.....................................................£29.99 + VAT

  (20 mile radius from Harrow - HA1 3UA)


- Click & Collect

˗ Boxed (Harrow - HA1 3UA) .......................................£0

 ˗ Ready to go (Harrow - HA1 3UA) ..............................£7.99 + VAT

(For detailed terms and conditions please click here.)

 

- For Tractors only 

 

- Collection Charges:

˗ Boxed (Harrow - HA1 3UA) .......................................£0

 ˗ Ready to go  (Harrow - HA1 3UA) .............................£124.99 + VAT

 

˗ White Glove Service*.................................................£164.99 + VAT

  (20 mile radius? from Harrow - HA1 3UA)

(For detailed terms and conditions please click here.)


-Delivery Charges:

 

UK:

˗ Boxed .........................................................................£50 + VAT

˗ Assembled .................................................................£174.99 + VAT

 

Ireland:

˗ Boxed .........................................................................£150 + VAT

˗ Assembled .................................................................£299.99 + VAT

 

Please call Customer Services on 020 8908 4744 for any delivery inquiries or click here to know more.

Be the first to review STIHL MS 441 C-M W. Write a review ›
Related Products